Serving the Baton Rouge area  ·  (225) 465-0909  ·  Open Mon-Sun 7am-7pm
📞 (225) 465-0909 Free Quote

Metal Roofing in Shenandoah, LA (70817) · Local Professionals

Baton Rouge Metal Roofing · Fast response in Shenandoah and the Baton Rouge area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Shenandoah is the kind of Baton Rouge neighborhood where the roofs take a beating. Most of the homes here went up between the 1990s and the 2020s, slab-on-grade brick and stucco houses with low-pitch roofs, and the Louisiana sun has been cooking those shingles for twenty or thirty years. If you live off Jones Creek Road or near Shenandoah Park, you already know the pattern: another summer of algae streaks, another batch of granules in the gutters, another round of ceiling stains after a hard rain.

That is why homeowners in 70817 call Baton Rouge Metal Roofing. We have been installing, repairing, and replacing metal roofs across the Capital Region since 2009, and we know what Shenandoah weather does to a roof. The afternoon downpours, the spring hail, the wind that comes through with every hurricane season, all of it hits these subdivisions hard. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we treat every house like it is our own.

Metal Roofing in Shenandoah (70817)

Shenandoah sits on the higher ground east of the Amite River, and most of the lots here are generous but flat, with tight side yards and landscaping that has had thirty years to grow in. That matters when we are setting up a job. We are often working over established shrubs, around pool cages, and close to property lines, so panel lengths and staging have to be planned carefully. The heat and humidity are the real story, though. Asphalt shingles bake and curl in this climate, and the algae that streaks so many Shenandoah roofs is a constant battle. Standing seam metal solves both problems. It reflects the sun, sheds the rain fast, and does not feed the algae. We also handle the gutters, because a metal roof and a properly sized gutter system work together to keep water away from your slab and foundation.

Our team has been serving Shenandoah and the surrounding Baton Rouge area since 2009. We have worked on homes near the Country Club of Louisiana, around Shenandoah Elementary, and along the streets that feed into Jones Creek Road. We know the local building department, we know what the HOA design reviews look for, and we know how to document a storm claim so your insurer has what it needs.

Our services in Shenandoah

How a Job Works in Shenandoah

Step 1: You call us at (225) 465-0909 or fill out the form on this page. We schedule a free on-site assessment at a time that works for you. We walk the roof, check the attic if needed, look at the flashing and fasteners, and talk through what you are seeing. You get a written estimate with clear numbers, not a sales pitch.

Step 2: Once you approve the scope, we pull the permits and coordinate with your HOA if the neighborhood has one. In Shenandoah, that often means submitting panel profile and color choices for approval before we order materials. We schedule the work, protect your landscaping, and keep the job site tidy. Most residential re-roofs here take a few days, depending on the size of the house and the weather.

Step 3: When the last panel is set and the flashing is sealed, we clean up. We magnet-sweep for nails, haul away the old material, and walk the property with you. We do not consider the job done until you have looked at every detail and signed off.

Pricing in Shenandoah depends on the size of your roof, the pitch, the access, and the condition of the existing decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a full replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, assuming the old roof is in good enough shape and code allows it. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney work starts at $600. Gutters for metal roofs start at $9 per linear foot. We always provide a free estimate so you know exactly what your job will cost before we start. Call (225) 465-0909 to schedule.

✅ Metal Roofing Alliance Member, licensed and insured for work in Shenandoah and nearby areas.

My Shenandoah roof has dark streaks running down the shingles. Is that algae, and will a metal roof stop it?
Yes, those streaks are almost certainly algae, and it is very common in Shenandoah because of the humidity and the shade from mature trees. Asphalt shingles hold moisture and feed the algae. A standing seam or stone-coated steel roof does not have that problem. The surface stays cleaner, and you can go years without the streaking that makes a shingle roof look old before its time.
A storm just blew through Shenandoah and I think I have wind damage. How fast can you get out?
We offer free storm and wind damage inspections, and we prioritize active leaks and lifted panels. Call us at (225) 465-0909 and we will get a crew out as soon as possible, usually within a day or two depending on how many calls we are handling after the storm. We document everything for your insurance claim and make temporary repairs if needed to stop water from getting in.
What does a typical metal roof cost for a house in Shenandoah?
Most Shenandoah homes are between 1,500 and 3,000 square feet of roof area. At our starting prices, a standing seam roof would run roughly $15,000 to $30,000, and a corrugated or ribbed panel roof would be less, starting around $5.50 per square foot. The exact number depends on pitch, access, and whether we are removing the old roof. We give free estimates so you get a real number for your house.
Do I need a permit to replace my roof in Shenandoah?
In most cases, yes. A full replacement or re-roof typically requires a permit, and the rules and inspection requirements can vary. We pull the permits for you and make sure the work meets code. You can also check with the City of Shenandoah through the official city website at https://www.brla.gov for general information, but we handle the paperwork so you do not have to.
My HOA in Shenandoah has design rules. Can you help with approval?
Yes. Many Shenandoah neighborhoods have architectural review committees that want to see panel profiles and colors before work starts. We can provide samples, spec sheets, and photos of similar installations to help your request move through. We also respect property line setbacks and will flag any issue before we order materials so there are no surprises.
Are you insured for work on my Shenandoah property?
We are fully insured, with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start. That protects you if anything happens on the job, and it is one of the reasons homeowners and property managers in Shenandoah choose us.
What maintenance does a metal roof need in Shenandoah's climate?
Not much, but a yearly look is smart. We recommend checking the fasteners and sealant around flashing and penetrations once a year, especially after hurricane season. Keeping gutters clear matters too, because our afternoon downpours can overwhelm a clogged gutter fast. We offer inspections and maintenance plans, and we can replace any backed-out screws before they turn into a leak.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baton Rouge

All your work handled by qualified professionals in Baton Rouge

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Baton Rouge

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baton Rouge · Response within 24h · No commitment · ☎ (225) 465-0909

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baton Rouge ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm