Serving the Baton Rouge area  ·  (225) 465-0909  ·  Open Mon-Sun 7am-7pm
📞 (225) 465-0909 Free Quote

Metal Roofing in Central, LA (70818) · Local Professionals

Baton Rouge Metal Roofing · Fast response in Central and the Baton Rouge area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Central, Louisiana, is the kind of place where the live oaks are older than the subdivisions and the August 2016 flood is still part of the conversation. The housing stock here tells that story: raised rebuilds and new slab homes side by side with 1970s brick ranches and the occasional farmhouse on a few acres, all spread out along Greenwell Springs Road and the back roads toward Blackwater Bayou. After Hurricane Ida in 2021, a lot of folks here stopped patching shingles and started asking about metal.

We are Baton Rouge Metal Roofing, and we have been working in Central and around Baton Rouge since 2009. When a homeowner on the north side of Central calls about a leaking carport or a wind-lifted panel after a spring storm, we know the drive and we know the roof. We are fully insured, a Metal Roofing Alliance member, and we handle everything from a $450 leak repair to a full standing seam installation on a raised home in the 70818.

Metal Roofing in Central (70818)

Central is not Baton Rouge proper. The lots are wider, the driveways are longer, and a lot of properties sit on a slight grade that drains toward a ditch or a bayou rather than a city storm sewer. That matters for metal roofing because water management at the eaves and in the gutters is half the battle. We see a lot of homes here with mature trees close to the roofline, which means fallen limbs, tannin stains, and debris-packed valleys. We also see raised homes rebuilt after the 2016 flood where the roof pitch and the tie-in at the new addition are the weak points. Our crews are used to working on tight access lots off streets like Joor Road and Sullivan Road, and we plan the panel delivery and staging so we are not blocking your neighbor's driveway for a week.

Since 2009, we have installed, repaired, and replaced metal roofs across Central and the surrounding Baton Rouge area. We know which panel profiles shed our heavy summer downpours cleanly and which fasteners hold up to the wind uplift we get in a bad spring squall.

Our services in Central

How a Job Works in Central

Step 1: you call (225) 465-0909 or send us a request, and we schedule a free on-site assessment. We walk the roof, check the fasteners, seams, flashing, and gutters, and we take photos. You get a written estimate with the scope and the price, not a ballpark over the phone.

Step 2: once you approve, we pull the permit if one is required and schedule the work. In Central, permit timing can vary, so we confirm the requirements with the local building department before we order materials. If your home is in a subdivision with an HOA, we help you get the panel profile and color approved before installation day. On installation day, our crew protects your landscaping, stages panels out of the way, and works around the weather.

Step 3: we clean up. We magnet-sweep for screws and metal shavings, haul off old materials, and walk the finished roof with you. We do not leave until you have seen the work and the cleanup is done.

Pricing in Central depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need it done. For a typical single-family home here, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a metal roof over existing shingles (retrofit) starts around $7. If you are repairing rather than replacing, metal roof repair and leak repair start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Gutters for metal roofs start around $9 per linear foot. These are starting figures, not a quote. Call (225) 465-0909 for a free estimate on your property in 70818.

✅ Metal Roofing Alliance Member, licensed and insured for work in Central and nearby areas.

My house in Central was raised after the 2016 flood and the roof was tied into a new addition. Can you match the metal to the existing panels?
Yes. Raised homes and post-flood additions are common here, and the tricky part is usually the transition where the new roof meets the old. We measure the existing panel profile and gauge, check the pitch, and either match it or design a proper transition flashing so the seam is watertight. We will tell you honestly if a match is not possible and what the alternatives are.
A storm just peeled back some panels on my roof off Greenwell Springs Road. How fast can you get out?
We prioritize active leaks and wind damage. Call (225) 465-0909 and describe what you are seeing. We can often get an inspection scheduled quickly, and if the roof is open, we can discuss temporary protection while the repair is scoped. We document the damage with photos, which helps if you are filing an insurance claim.
What does a metal roof actually cost for a 2,000 square foot house in Central?
For a 2,000 square foot home with a typical pitch, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam starts around $10 per square foot. The range depends on the panel type, the number of penetrations, decking condition, and whether we are removing old shingles. A free estimate at (225) 465-0909 will give you a real number.
Do I need a permit for a metal roof replacement in Central, and where do I check?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements can vary. We confirm the rules with the local building department before we start, and you can also check with the City of Central website at https://www.brla.gov for official information. We handle the paperwork as part of the job.
My neighbor's oak tree drops limbs on my roof and my HOA has rules about metal roof color. How do we handle that?
We deal with both issues regularly in Central. For the tree, we can inspect for punctures and recommend a panel that handles debris better, plus gutter guards if limbs are a constant problem. For the HOA, we help you submit the panel profile and color for approval before we order materials, so there are no surprises on installation day.
Are you insured for work on my property in Central?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What should I do to maintain a metal roof in Central between hurricane seasons?
Have the roof inspected once a year, ideally in late spring before the heavy summer storms. We check fasteners for backing out, clear debris from valleys and gutters, and look at the flashing around chimneys and skylights. After a big wind event, a quick visual check from the ground is smart. A $450 repair now is cheaper than a leak that reaches your ceiling.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baton Rouge

All your work handled by qualified professionals in Baton Rouge

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Baton Rouge

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baton Rouge · Response within 24h · No commitment · ☎ (225) 465-0909

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baton Rouge ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm