Serving the Baton Rouge area  ·  (225) 465-0909  ·  Open Mon-Sun 7am-7pm
📞 (225) 465-0909 Free Quote

Metal Roofing in Greenwell Springs, LA (70739) · Local Professionals

Baton Rouge Metal Roofing · Fast response in Greenwell Springs and the Baton Rouge area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Greenwell Springs is where the city gives way to horse pastures, gravel driveways, and big lots shaded by live oaks along Greenwell Springs Road. The housing here runs from older brick ranches and farmhouses to newer custom builds and metal barns and shops, and most of them sit on acreage with a few outbuildings.

That mix is exactly why homeowners in 70739 call Baton Rouge Metal Roofing. We have been installing, repairing, and replacing metal roofs since 2009, and we understand how these rural properties hold up to heat, hurricanes, and the occasional limb through a panel. Whether you are near the Comite River or off Joor Road, we can give you a straight answer.

Metal Roofing in Greenwell Springs (70739)

Greenwell Springs properties tend to be larger, with detached shops, barns, and covered equipment, and the ground can shift from sandy high spots to low, wet bottomland near the Comite River and its tributaries. That means drainage and fastening matter as much as the panel itself. We see a lot of older corrugated roofs on barns and outbuildings that have lost screws, and homes where a low-slope porch or addition needs careful flashing. Access can be tight between trees and fences, and we plan for that before we start. We also work around the heavy summer downpours and storm-season wind that test every seam and fastener.

Our team has served Greenwell Springs and the greater Baton Rouge area since 2009, and we are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation.

Our services in Greenwell Springs

How a Job Works in Greenwell Springs

Step 1: You call us at (225) 465-0909 or request a free estimate. We come out to your property, walk the roof and the outbuildings if needed, and talk through what you are seeing. We check for failed fasteners, rust, flashing gaps, and anything that could turn into a leak.

Step 2: We schedule the work and handle the details. On larger lots we plan for equipment access and staging, and on homes we coordinate with any HOA or historic review that applies. If a permit is required, we point you to the City of Greenwell Springs website at https://www.brla.gov so you can confirm the local rules with the building department.

Step 3: When the job is done, we clean up thoroughly, haul away old material, and walk the finished roof with you. We do not leave nails or scraps behind, and we make sure you know what was done and why.

Pricing in Greenwell Springs depends on the size and pitch of the roof, how many layers are already there, access around trees and outbuildings, and how much repair versus replacement is needed. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof over shingles starts at $7 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight work starts at $600. We give free estimates, so call (225) 465-0909 and we will put real numbers to your project.

✅ Metal Roofing Alliance Member, licensed and insured for work in Greenwell Springs and nearby areas.

My barn or shop in Greenwell Springs has an older corrugated metal roof with loose screws. Can you fix that without a full replacement?
Yes, in many cases. We inspect the panels and fasteners first. If the metal is still sound, screw replacement and re-fastening can often solve the problem and stop leaks at the fasteners. If panels are rusted through or the purlins are compromised, we will tell you straight and quote a replacement.
A storm just peeled back panels on my roof off Greenwell Springs Road. How fast can you get out?
Call us at (225) 465-0909 as soon as you can. We offer free storm and wind damage inspections and will schedule a visit to secure the roof and document the damage. We cannot promise a specific arrival time, but we prioritize active leaks and open roofs.
What does a typical metal roof replacement cost for a home in 70739?
Most full replacements fall in a range based on square footage and panel type. Metal roof replacement starts around $9 per square foot, and standing seam starts around $10 per square foot. Larger homes, complex rooflines, and tight access around trees can push that up. We give a free on-site estimate so you have a real number.
Do I need a permit to replace my roof in Greenwell Springs?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds and inspection requirements vary by jurisdiction. We always recommend confirming the current rules with the local building department. You can start at the City of Greenwell Springs website at https://www.brla.gov and ask about your specific address before work begins.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line issues are best resolved before installation. We can review the roof plan with you and keep the work within your boundary. If your neighborhood has an HOA, we can coordinate on panel profile and color approval so you are not dealing with a complaint after the fact.
Are you insured for work on my Greenwell Springs property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start, and our crews are covered while they are on your roof and around your outbuildings.
What maintenance should I do on a metal roof in Greenwell Springs between storms?
Check fasteners and seams once a year, especially after spring storms and hurricane season. Keep limbs and debris off the roof and out of the gutters, and look for rust or loose flashing around chimneys and skylights. If you see a problem, call us at (225) 465-0909 for a free inspection before it turns into a leak.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baton Rouge

All your work handled by qualified professionals in Baton Rouge

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Baton Rouge

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baton Rouge · Response within 24h · No commitment · ☎ (225) 465-0909

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baton Rouge ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm