Serving the Baton Rouge area  ·  (225) 465-0909  ·  Open Mon-Sun 7am-7pm
📞 (225) 465-0909 Free Quote

Metal Roofing in Oak Hills Place, LA (70810) · Local Professionals

Baton Rouge Metal Roofing · Fast response in Oak Hills Place and the Baton Rouge area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Oak Hills Place is a quiet, established community just south of Baton Rouge, where mature live oaks tower over brick ranches, newer slab homes, and the occasional custom estate. Lots here are generous but often shaded, and those big oaks are both a blessing and a hazard when storms roll through. If you live off Highland Road or near the Country Club of Louisiana, you know exactly what we mean.

Homeowners in Oak Hills Place (70810) call Baton Rouge Metal Roofing because we understand the local risks: fallen limbs, wind-lifted panels, and leaks that show up after a heavy downpour. Since 2009, we've been installing and repairing metal roofs across the Baton Rouge area, and we treat every home like it's in our own backyard.

Metal Roofing in Oak Hills Place (70810)

Oak Hills Place sits on the first bluff above the Mississippi River, with bayous and bottomland nearby. The terrain is mostly flat, but drainage can be tricky after heavy rains, especially on lots with mature oaks whose roots and shade keep things damp. Homes here range from 1970s brick ranches to newer slab construction, and many have steep pitches or complex rooflines that require careful flashing and fastening. The biggest local challenge is falling limbs from those giant oaks, which can puncture even sturdy metal. That's why we often recommend standing seam or heavier-gauge panels for homeowners with large trees overhead. We also deal with wind uplift from hurricanes like Gustav and Ida, and we know how to secure panels to meet local wind-load requirements.

Our team has been serving Oak Hills Place and the surrounding Baton Rouge area since 2009. We're a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we've seen just about every roofing issue this climate can throw at a home.

Our services in Oak Hills Place

How a Job Works in Oak Hills Place

Step 1: You call us at (225) 465-0909 or fill out our online form. We schedule a free on-site assessment at your convenience. We'll inspect your current roof, discuss your options, and provide a detailed written estimate. If it's a repair, we'll pinpoint the problem and explain what's needed.

Step 2: Once you approve the estimate, we handle the paperwork. In Oak Hills Place, roofing permits are typically required for replacements, and we'll pull the necessary permits and coordinate inspections. If your home is in a historic district or HOA, we'll help you navigate design review and color choices. Our crews are experienced with tight lot access and careful staging to protect your landscaping.

Step 3: After the work is done, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you're satisfied. We leave your yard as clean as we found it, and we don't consider the job finished until you're happy.

Pricing for metal roofing in Oak Hills Place depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're retrofitting over shingles, that starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. We also offer coating and painting from $2.50 per square foot, and gutters from $9 per linear foot. For a precise quote tailored to your home, call us at (225) 465-0909. We'll give you a free estimate with no pressure.

✅ Metal Roofing Alliance Member, licensed and insured for work in Oak Hills Place and nearby areas.

My Oak Hills Place home has several large live oaks hanging over the roof. What's the best metal roofing option to resist falling limbs?
With heavy oak limbs overhead, we typically recommend standing seam metal roofing with a heavier gauge panel (24-gauge or thicker) because it offers better impact resistance and fewer fasteners that can back out. We can also install snow guards or branch deflectors if needed. During our free inspection, we'll assess your tree canopy and suggest the right profile and thickness for your situation.
A storm just dropped a limb on my roof in Oak Hills Place. How quickly can you respond for emergency repair?
We prioritize storm damage calls in Oak Hills Place and the surrounding area. Call us at (225) 465-0909, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We'll tarp any active leaks and provide a written estimate for permanent repairs.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Oak Hills Place?
For a 2,000-square-foot home, a standard metal roof replacement typically ranges from $18,000 to $24,000, depending on the material (corrugated, standing seam, stone-coated steel) and roof complexity. Standing seam or copper will be at the higher end. We provide a detailed, itemized estimate after inspecting your roof.
Do I need a permit to replace my roof in Oak Hills Place, and how do I find out the requirements?
Yes, roofing permits are commonly required for a full replacement in Oak Hills Place. Requirements vary, so it's best to check with the City of Oak Hills Place website (https://www.brla.gov) or call the local building department. We handle permit applications for our customers and ensure all work meets code.
My HOA requires approval for roof color and style. Can you help with that process in Oak Hills Place?
Absolutely. Many neighborhoods in Oak Hills Place have HOA design guidelines. We can provide material samples, color chips, and specification sheets for your HOA submission. We'll also coordinate with your HOA to ensure the installation meets their requirements, including panel profile and color.
Are you fully insured for roofing work in Oak Hills Place?
Yes, Baton Rouge Metal Roofing is fully insured with both general liability and workers' compensation coverage. We're happy to provide certificates of insurance upon request, so you can have peace of mind knowing your property and our crew are protected.
What maintenance should I do on my metal roof in Oak Hills Place to prepare for hurricane season?
Before hurricane season (June through November), we recommend a professional inspection to check for loose fasteners, damaged flashing, and debris buildup in valleys and gutters. Trim any overhanging oak limbs that could fall. We offer free inspections and can perform minor maintenance like screw replacement to keep your roof secure.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baton Rouge

All your work handled by qualified professionals in Baton Rouge

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Baton Rouge

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baton Rouge · Response within 24h · No commitment · ☎ (225) 465-0909

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baton Rouge ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm