Serving the Baton Rouge area  ·  (225) 465-0909  ·  Open Mon-Sun 7am-7pm
📞 (225) 465-0909 Free Quote

Metal Roofing in Inniswold, LA (70809) · Local Professionals

Baton Rouge Metal Roofing · Fast response in Inniswold and the Baton Rouge area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Inniswold is that pocket of East Baton Rouge where 1970s brick ranches and newer slab homes sit under live oaks just off Jefferson Highway, minutes from the Mall of Louisiana and I-10. If your shingle roof has been through enough Gulf downpours to start curling at the edges, you are not alone.

Homeowners in Inniswold (70809) call Baton Rouge Metal Roofing because we have been solving exactly that problem since 2009. We are a Metal Roofing Alliance member, fully insured, and we know how these lots drain when a summer storm dumps two inches in an hour.

Metal Roofing in Inniswold (70809)

Most of Inniswold's housing stock went up between the 1960s and 1990s, with a mix of brick ranches, garden homes, and two-story traditional builds on lots that are often shaded by mature oaks and magnolias. That shade is beautiful, but it keeps roofs damp and hides the early signs of fastener back-out and flashing failure. The ground here is generally flat with slow drainage in heavy rain, so we pay close attention to gutter capacity and downspout placement on every metal roof we install. Access can be tight on the interior streets near Jefferson Highway and Essen Lane, so we plan panel delivery and staging before the crew arrives.

We have been serving Inniswold and the surrounding Baton Rouge area since 2009. Our crews handle everything from a straightforward metal roof over existing shingles to standing seam, stone-coated steel, and full tear-off replacement. We are fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance member.

Our services in Inniswold

How a Job Works in Inniswold

Step 1: You call (225) 465-0909 or request a free estimate online. We schedule an on-site assessment, inspect your existing roof and attic, check flashing at chimneys and skylights, and talk through metal roof over shingles versus a full replacement. You get a written scope and price before any work begins.

Step 2: We pull the required roofing permit through the local building department and coordinate any HOA design review if your subdivision requires it. On installation day, our crew protects landscaping, stages panels carefully on tight Inniswold lots, and keeps the job site organized. We handle retrofit over shingles when your existing layers allow it, and we verify that before we order material.

Step 3: We clean up completely, haul away old material and fasteners, and walk the roof and gutters with you. We do not leave until you have seen the finished work and know how to reach us for any follow-up.

Pricing in Inniswold depends on roof size, pitch, access, and the condition of what is underneath. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, while copper and specialty metal start at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Metal roof coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (225) 465-0909 for a free estimate with real numbers for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Inniswold and nearby areas.

My Inniswold ranch has two layers of old shingles. Can you still do a metal roof over shingles?
Sometimes, but code limits how many existing layers can stay. We inspect the deck and count layers during the free assessment, then tell you honestly whether a retrofit is allowed or whether a tear-off is the safer path. Many homes near Jefferson Highway and Essen Lane qualify for retrofit, which saves on disposal costs.
A storm just lifted panels on my roof in Inniswold. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (225) 465-0909 and describe the damage; we will schedule the soonest available visit and can often tarp or secure the area the same day to prevent further water intrusion.
What does a typical metal roof repair cost in Inniswold?
Most repairs start at $450, and leak repairs start at the same figure. Screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. The final price depends on roof height, how many fasteners or seams are involved, and whether the leak has damaged decking underneath.
Do I need a permit for a metal roof in Inniswold, and where do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We handle the permit application as part of the job. You can also verify local requirements through the City of Inniswold website at https://www.brla.gov before work begins.
My HOA has design rules. Will a metal roof be approved in my Inniswold subdivision?
Many Inniswold-area HOAs restrict panel profile and color, so we help you choose a standing seam or stamped shingle product that fits the architectural review. We provide product samples and specification sheets you can submit. We also respect property lines and coordinate with neighbors when staging materials or equipment near a shared fence.
Are your crews covered by insurance while working on my Inniswold property?
Yes. We carry general liability and workers' compensation coverage, and we are fully insured. You can ask for a certificate of insurance before work starts. That protects you if anything goes wrong on your roof or around your home.
What maintenance does a metal roof need in Inniswold's climate?
Heavy summer downpours and spring wind storms are the main stress here. We recommend an annual inspection, especially after hurricane season, to check fasteners, sealant at penetrations, and gutter flow. Keeping oak leaves and debris off the roof and out of gutters prevents the standing water that leads to seam and flashing failures.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baton Rouge

All your work handled by qualified professionals in Baton Rouge

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Baton Rouge

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baton Rouge · Response within 24h · No commitment · ☎ (225) 465-0909

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baton Rouge ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm